The ability to better your skills presents itself from time to time. At your job, you may get in-office training to learn something new. But you can also learn a lot from reading article like this one. This article is full of tips to improve your woodworking skills.

Use a pre-stain wood conditioner before staining the wood. You will get less irregularities or blotches if you apply a quality pre-stain product. These applications even out the stain on the wood.

Safety always comes first. Be sure that you use the tools as they’re supposed to be used while you’re wearing safety equipment. Do not remove any safety guards from tools because they are there for your protection. You don’t want to go to the hospital because you did something stupid.

TIP! Safety must be a priority when doing woodworking. Use the right safety gear and operate tools according to their manual.

Before using any stains or finishes on your wood, make sure you stir them and not shake them. Ingredients may have settled onto the bottom as they sat on the shelf. However, if you shake it, it may create bubbles and not allow the product to mix well. You need to stir it well. Keep stirring until all the settlement is evenly and smoothly dispersed.

Make sure you choose the right wood for each project that you work on. Some woods cannot handle the same stress that other woods are able to. If you are unsure of how each type of wood will react to what you are trying to accomplish, you should spend some time learning about them first.

If you are renting a tool that’s new to you, ask the company you are renting from for a quick tutorial. Oftentimes, they have someone available to train you with the tool. You can also ask them if they have some kind of a handout that gives tips on what you can do with the tool.

Pre-stain wood conditioners should be used prior to staining any wood project. These conditioners will make the finished project look better. These conditioners are going to help smooth out the wood so that the stain can get into it more evenly.

TIP! It is always a good idea to have a pre-stain conditioner for the wood you’re planning to stain. A pre-stain conditioner helps keep away any irregularities or blotches in the wood.

Never use your fingers like a guide. Use a thin and long strip of wood instead. That means you get to keep your fingers, which means you get to keep woodworking.

One of the essential tools for any woodworking shop is a stair gauge. These gauges are used to lay out stair jacks but they are also very useful if you need something to clamp a carpenter’s square. This will turn your square in to a circular saw guide. This is a good way to cut your wood in a straight line.

Before using wood, make sure you have a good grasp of all the different types of woods that are out there. Wood varies from type to type. Staining looks different on various types of wood. Also, different woods splinter differently when they are cut. You will also see a wide range of different grains. All of these factors have an effect on your wood project.

Before using any stains or finishes on your wood, make sure you stir them and not shake them. Stir often because these stains settle over time. But, shaking may cause unwanted bubbling, and keep the product from mixing well. Stir the mixture thoroughly.

TIP! If you’re working on a woodworking project that calls for stain, always stir the stain first. The ingredients can settle eventually.

You must strive to do better every time you have the opportunity. Even learning new woodworking skills or experimenting with a new recipe leads to self-improvement. Use these tips to help make your next woodworking project and all the others a breeze.