Are you new to woodworking? This article can help. Woodworking may seem intimidating at first, but if you do your research it can be quite easy to do. The tips below can help you today!

As with anything involving power tools, safety is the number one concern in woodworking. Be certain you always have the right safety equipment, and use your tools properly. Don’t take guards off a tool – they’re intended to keep you safe. Nasty injuries are no way to end a woodworking project.

When thinking about your project’s budget, remember to include the cost of any new tools you will need to purchase or rent. You may only think about the wood and overlook the tools themselves. Tools can be expensive so you should definitely remember to count them.

TIP! When you are creating a woodworking budget, be sure to include the price of the tools you will need to purchase to complete your project. This is simple to overlook when creating that budget, but one that is necessary.

If you plan on staining your project, try using pre-stain conditioner on your wooden surfaces. These conditioners will make the finished project look better. Such conditioning agents smooth the wood surface and let stains sink in evenly.

Create sanding blocks you can reuse. Start by cutting a few blocks from a scrap piece of plywood for all the sandpaper grits you need to use. Each block should be about 2 inches by 4 inches. Spray adhesive on your blocks and also the cork square tile. Stick a single block onto the cork and make sure you’re cutting the cork in a flush way using your utility knife. Apply a bit of adhesive to a sheet of sandpaper and place it onto the cork blocks facing down. Lastly, put the sandpaper flush to the cork, labeling all blocks.

Gel Stains

Get a handle on how a wood takes to staining prior to choosing a wood for a project. Paint grade indicates that the wood is not of high quality, while stain grade indicates that the wood has a grain pattern that is suitable for staining wood. Particle board and veneer are also unsuitable for staining. The right wood will help make sure your project comes out how you want it to.

TIP! Know all about the wood you are getting prior to purchasing it, especially if you plan to stain it. Paint grade refers to low quality wood, for instance, while stain grade refers to better gain pattern used for staining.

If you plan to stain furniture, look in to gel stains. Stains that are liquid will run when you apply them, but gels tend to stick to lumber. Gel stains will create a more consistent finish on pieces, as well.

Every woodworking shop should have a stair gauge in it. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square. This will transform your carpenter’s square from a straight-line tool, into a straight guide for your saw. You can have straight cuts every single time when you use that square.

It’s very important to always make sure that the saw blade you use is in great condition every time you use it. A dull blade will not allow you to finish your project. It could also lead to costly errors, depending on what type of wood you are using.

A golf tee is a wonderful fix for wiggling hinges. Remove the door and hinges from the frame and tap the golf tee into the hole. Cut the excess, then put the door back on. This will give the screw the support that it needs.

TIP! A golf tee provides a quick and easy fix for loose interior door hinges. Just take the door off the hinges and tap the golf tee into the offending screw hole.

Add a bit more spring to your hand grip. You may only have one hand available when you need to use spring clamps. This isn’t a simple task! However, there’s a way to easily open them. Before you begin a glue-up, place all the clamps that you need on a random scrap of wood using both free hands. Because the clamps will already be open, this will allow you to easier grab and use one with only one hand.

Search for recycled wood. Many places will get rid of scraps that you can use. Many places like home improvement stores will have scrap wood. Use this to your advantage and see if they have something you can use for your project. You will find in time that you are saving a good deal of money on each project.

Search around for used furniture that people toss out. Often, you can find pieces of wood furniture that are free of charge or very cheap. Think about the possibilities before you dismiss anything. If an old dresser has outlived its usefulness, the wood itself has not. Use the drawers to fashion an artistic bookcase.

Is there a screw that is in a difficult to reach area? Do not look past your toolbox for the answer. Grab a long handle screwdriver and a 12 point socket. Attach the socket first to your screwdriver and then to the appropriate ratchet.

TIP! Is there a screw that needs tightening, but it is located in an unreachable spot? You should look to your toolbox for assistance. Get your longest handle screwdriver, as well as a 12-point socket.

There are some important hand tools that you should buy prior to beginning your first woodworking work. A hammer is a good first tool. A claw hammer is the best option for woodworking projects. Choose one that feels right in your hand. Hammers that are too heavy are never a good choice.

Wet any surface you plan on sanding. This helps raise the wood grain. That helps you avoid scratches. This will give your finished woodworking project a professional appearance. It’ll also save you work in the future.

Check your wood stain on an inconspicuous spot. Your stain may appear differently than anticipated, or it might not go on smoothly. By trying the stain out somewhere where it won’t be noticeable, you can make sure it’s what you want. That saves you work overall.

Watch for ways to get free wood in your area. Many businesses often have pallets they no longer want, and may let you have them if you have a vehicle to haul them off with. Look online for some examples of up-cycled pieces to give you some ideas before you start.

TIP! Look around for free wood in your area. Lots of businesses have pallets they do not need and are willing to give them away for free.

Use only one extension cord in your shop. Unplug your tools as you need a new opening. This safety tip will keep you from tripping over tangled cords and reduce the risk of electrocution.

Woodworking is definitely challenging at times, but the rewards you get from it are worth it. When you see your finished piece, you will be happy that you followed through and completed something of value that will last for years to come. Use the information in this article to help you create stunning wood pieces.