There are a lot of people who think wood is great to work with. There are an endless number of things that can be made of wood. Great information is essential to woodworking success. Keep reading for some great ideas that will help you become a better woodworker.
Consider making your own sanding blocks that can be used again and again. Cut six blocks from any 3/4″ plywood you have, for each sandpaper grit you regularly use. They need to be 2.5″ X4.75″. Spray some adhesive on your blocks and on the cork tile. Apply the cork to the block and use a utility knife to cut the cork flush with the block. Use spray glue on sandpaper and stick it to the block. Finally, trim the sandpaper and label each block.
Always make safety first with a woodworking project. Be certain you always have the right safety equipment, and use your tools properly. Avoid taking off the guards on power tools; they are meant to protect you. This will reduce the chances for severe injury.
When using stain, try a test on a small scrap you may have available or in an area on the wood that will be out of sight. This can help you avoid surprises in case your stain color is different after you’ve applied it. This simple testing tactic lets you counter the unpredictability of wood.
Pick out the wood that’s right for your project you’re doing. Some woods cannot handle the same stress that other woods are able to. If you don’t know how each wood type reacts to what you’re trying to do, spend a bit of time learning about it.
Make sand blocks that you can reuse. Cut six 3/4″ pieces of plywood for each sandpaper grit. They should be 2.5″ by 4.75″. Spray adhesive on the wood and a piece of cork. Stick a block on the cork and cut it flush with a knife. Get a sandpaper sheet, spray it with adhesive, and then apply it to each of your cork blocks; they need to be face down. You can make smaller blocks if you wish as well. These can be used for smaller pieces demanding finer sanding.
A small metal ruler is handy to carry around in your pocket for quick measuring. It has a tendency to fall out of your pockets, though. Make it a metal ruler and store it alongside your telescoping magnet. The magnet will ensure that the ruler won’t fall out.
You want to keep your ears protected when woodworking. Woodworking machines make a lot of noise. In fact, staying in one without ear protection for long durations can lead to hearing loss. Good headphones or even disposable ear plugs are good ideas. Whatever you go with, be sure you’re wearing them when using the loud machinery.
Do you have screws that are out of reach that need tightened, but you can’t fit a screwdriver or your hand in the area? Look no further than your toolbox. Grab a long handle screwdriver and a 12 point socket. Put the socket over the handle of the screwdriver, then use the ratchet to reach tough spots.
Stir finishes or stains before using them. The ingredients in these can settle over time. Shaking can cause bubbles and lead to uneven mixing. Stir thoroughly until it is even.
Some people don’t have the imagination to turn wood into something special. For those that can, this article was designed to help broaden the skills that will shape the wood into fun projects. The tips in this article can help you enjoy working with wood.