If you’ve ever looked at beautiful woodworking and wondered if you could do the same, you’ve come to the right place. There isn’t a lot of information about it, so that’s why this information is here. If you want to get better at woodworking, follow these tips.

If you will be using stain, always do a test on an inconspicuous area, or scrap of wood. By doing this, you can prevent unwanted surprises in the event that the stain color turns out differently than you expected. Wood is unpredictable so you’ll want to test it first.

Safety always comes first. Always wear safety equipment and use tools the proper way. Always keep the tool guards on, since they are there to keep you safe. You can’t complete the project if you end up hurting yourself.

TIP! When you are working with wood, always think about safety. Always use your tools properly while wearing adequate safety equipment.

Use tin snips to trim laminate for your projects. They will make it easy for you to cut quickly and easily and get the laminate to a size that is usable. Using them only for this laminate also helps keep them sharp.

A stair gauge is an essential item in every wood shop. They can be used to clamp a carpenter’s square along with laying out stair jacks. That makes the carpenter square a guide for the circular saw. Every cut will be straight from now on.

Understand the features of different wood types prior to selecting it for a project that is to be stained. Paint grade always indicates that the wood isn’t a good quality, for instance, and stain grade will mean the grain pattern will be good for staining. Similarly, veneer and particle board are quite different; the former does not absorb stain well while the latter absorbs too much. Choosing the right wood turns your project into a success.

Make sanding blocks that are reusable. Begin by cutting some 3/4 inch plywood into blocks. Be certain the pieces are about two and a half inches by four and three quarter inches. Spray adhesive is what you use on both the blocks and cork tile square. Stick a block to the cork, making sure to cut the cork flush with a utility knife. Put adhesive on a sheet of sandpaper and apply it on each block of cork. Use a utility knife to trim the sandpaper around the edge of the block. Label each block.

TIP! Try making sanding blocks that are reusable on your own. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use.

Keeping a small ruler inside one of your pockets is a great idea, but it could fall out due to its size. Make it a metal ruler and store it alongside your telescoping magnet. Keep the ruler and the magnet in the same pocket. The ruler will stay in place.

Choose correctly-sized nails. Very large nails typically cause the wood to split, which will prevent it from holding well. However, too small of a nail will not penetrate deep enough to keep the wood held together. It is important that you find properly sized nails in order to have a successful project.

Get your grip ready for use in advance. There may be times that you only have one hand and need a spring clamp. These clamps may be difficult to open with one hand. You can make it simpler. Take all the clamps you’ll need and put them on a piece of wood or something within reach. This will make it much easier for you to use them with just one hand.

When creating crosscut guides, use a stair gauge. Clamp them to your carpenter’s square, and make sure they match your stair jack’s rise and run. Then you simply mark where the notches are. If they’re on the same carpenter square’s tongue, that combination can create the perfect guide for a crosscut using a circular saw.

TIP! Stair gauges can be used for crosscut guides. Clamp them on the carpenter’s square and be sure they match up.

Ear protection is important if you wish to delve into woodworking. Woodworking machines make a lot of noise. Extended exposure to such noise can cause hearing loss. You can buy disposable plugs for your ears, or get a good pair of headphones. Use them anytime you are using the machinery.

What do you do when you need to tighten a screw that is hard to reach? Your toolbox has the answer. Grab a screwdriver with a long handle and a 12-point socket. Use the socket to place on a screwdriver, and then attach it to a ratchet.

Avoid becoming too perfect with only using tape measures. You may find a story stick useful, and you have the option of gradually working toward making a cut. Cutting on your scrap wood first will be a great idea so you can test a fitting out. Having a variety of ways to plan out your cuts keeps you from mental boredom.

Stir your paint and stain, don’t shake it! Some of the ingredients in these stains and finishes tend to settle to the bottom over time. But, shaking may cause unwanted bubbling, and keep the product from mixing well. Be sure you stir it up until your mix is dispersed correctly and in a smooth manner.

TIP! It is always best to stir your stains and finishes, as opposed to shaking them. It is possible that some of the ingredients will settle as time goes on.

Try to find wood that has been recycled. Some woodworking shops discard useful scraps. Home improvement centers and flooring stores often discard unused wood. Check for pieces which might work for your project, or even just for practice. This can help you save a great deal of money.

Have lots of lighting in your work space. Measurements must be accurate when working with wood. Not being able to see your tools when you use them can be detrimental. You must have good vision when woodworking, or you may be injured.

When you do your first project, consider using a woodworking kit. They have all you need to complete a project. This will help you get started and teach you a few things about the fundamentals of woodworking. Practicing in this way is a good way to prevent waste resulting from newbie errors.

Don’t guide your saw with your fingers when cutting narrow pieces of wood. Instead you should use a thin and long strip of wood get push it through your saw. That keeps your fingers intact.

TIP! When cutting a narrow wooden piece, do not use fingers like guides! Use a piece of thin wood instead to help push along the piece. That means you get to keep your fingers, which means you get to keep woodworking.

You cannot anticipate when a foreign object may fly into your eye. Wearing goggles can save your vision. If you don’t have good fitting goggles that you can see out of, you need to find yourself a new pair.

There are some essential hand tools that you should get before beginning your initial woodworking project. A hammer is obviously a must-have item. Most woodworkers agree that a claw hammer is the best choice in a woodworking shop. Choose one that feels right in your hand. It should not be excessively heavy.

Always wet a surface before beginning to sand. The moisture will cause the grain to come up. Therefore, this will get rid of any scratches that may be on the surface. It will give your project a professional finish. It may also save work for you down the road.

Consider doing a dry fitting of your pieces before you use glue to join these together. If you make adjustments after you have glued the pieces, you might damage something. Doing a dry-fit gives you a chance to see how everything will go together when you apply glue.

TIP! When you have woodworking pieces ready for final assembly, always remember to run them through a quick dry-fit before you break out the glue. If you attempt to readjust the pieces once glued together, you risk damage to your project.

Be sure to measure twice. If the wood you are working with is especially expensive, you may even measure three times. Measuring is where a lot of people make mistakes. If you happen to cut an expensive piece of wood too short, you have likely wasted that piece, unless it can be used somewhere else.

After reading about woodworking, you have some solid tips to help you out. If you practice, you will get better every time. Use the tips here for help.