Finding your niche with woodworking as an art is a great thing. This skill can be a lot of fun. Fortunately for you, this article is full of useful tips on how to improve your skills. Continue reading to learn about this great pastime, and get ready to enjoy many hours of fun along the way.

When creating crosscut guides, use a stair gauge. Clamp your carpenter’s square to your stair gauges while ensuring they coincide with the rise and run of your stair jack. After this, you will have to mark each of the notches. When you clamp them on the one tongue of the carpenter’s square it will become a good crosscut guide for your circular saw.

As with anything involving power tools, safety is the number one concern in woodworking. Use the tools correctly and wear the right equipment. Always keep the tool guards on, since they are there to keep you safe. You don’t want to start in your workshop and end in a hospital bed.

TIP! When doing any woodworking project, safety is a big concern. Be certain you always have the right safety equipment, and use your tools properly.

Before using any stains or finishes on your wood, make sure you stir them and not shake them. The ingredients in these can settle over time. Shaking can lead to bubbling, though, which causes its own set of problems. Stir thoroughly until it is even.

Make sure you use the right kind of wood appropriate for the task at hand. Some woods will not do well as they cannot handle the stress that others will. If you don’t know what the limitations and strengths are for each wood species, look them up online or at the library. The more you know, the better.

Use tin snips to cut laminate that you are using for your projects. This tool is intended to cut metal, so it easily slices through laminates, which greatly reduces the energy needed. Try designating a pair of snips for laminate cutting so that they stay sharp.

Create sanding blocks you can reuse. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use. You want them to measure about two and half inches by four and a half. You can secure the sandpaper better with an adhesive. Put one block on the tile square and cut the cork with a utility knife. After spraying adhesive on a sheet of sandpaper, place it on the block face of each cork. Cut the sandpaper flush and label the block.

TIP! Consider making your own sanding blocks that can be used again and again. Begin by cutting some 3/4 inch plywood into blocks.

A stair gauge is a great tool to keep in your shop. They not only assist with stair jack layouts, but can also be used when your carpenter’s square needs to be clamped. That makes the carpenter square a guide for the circular saw. Every cut will be straight from now on.

Ear protection is vital when you begin a project. Woodworking can be very loud. Prolonged exposure to it can result in some loss of hearing. You can buy disposable plugs for your ears, or get a good pair of headphones. Whatever you go with, be sure you’re wearing them when using the loud machinery.

Always make sure your work area has amply lighting. Woodworking requires accuracy in measurement. Additionally, you’ll be using sharp instruments to cut the wood. To do so safely, you need to see what you are doing well. A well lighted wood shop is a happy wood shop.

You should understand that stains should be stirred, not shaken up. Some ingredients they contain will settle at the bottom of the can, which can effect the outcome of your project. But, if you shake it could cause bubbles to form which would mean it wouldn’t mix too well. Stir thoroughly until it is even.

TIP! Never shake a finish or a stain. Only stir them.

Stay in contact with others. Most woodworking shops do not have access to the Internet. Still, you may get stuck on some tricky projects. Another woodworker could give you the answers that you need. You can’t have a problem that someone else has not had.

Always keep your ears open for friends and family that are looking to sell their home. Skills in woodworking may come in handy to earn some extra money by increasing the value of a home. From creating new cabinets to building a shed, your value is great.

Perfection is never the goal when you are creating your own wood-worked items. Small blemishes give them character and personalization. You’ll continue to improve; these tips will help you along the way.

Ask the rental company for a speedy tutorial when renting a tool you aren’t completely familiar with. Many times, they have specialists that will show you how to use the tool properly and safely. You can also ask them if they have some kind of a handout that gives tips on what you can do with the tool.