If you have hesitated to try working with wood because it seems hard, you need to think again. If you begin with a solid knowledge base, you can succeed. All you need is the desire and motivation to learn. Read the tips presented here to transform yourself into the best woodworker you can be.

Consider making your own sanding blocks that can be used again and again. First cut 6 blocks from scrap plywood, one for each grit of sandpaper you like to use. They need to be 2.5″ X4.75″. Use some spray adhesive on your blocks and the cork tile. Put one block on the tile square and cut the cork with a utility knife. This piece should then fit you hand fairly well and be secure enough to not slip. Finally, trim the sandpaper and label each block.

A stair gauge is an essential item in every wood shop. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square. Doing so converts the carpenter’s square to a tool that can be used with a circular saw. You can always make perfectly straight cuts by using this method.

Quick Demonstration

If you rent a tool that is unfamiliar to you, ask the rental company for a quick demonstration. Many times the people who work there will give you a quick demonstration on how to correctly use the tool. Also ask for any documentation to help you out.

You can simply fix some hinges with a golf tee if you are working on an interior door. Take the door from the hinges and tap your golf tee into every screw hole. Cut the extra golf tee off and install the door again. A golf tee will give the screw a surface in which to adhere to.

If the hinges of any interior door are wiggled too loose, you can actually fix this with a golf tee. You need to remove both the door itself and the individual hinges from the total door frame. Then, locate each screw hole put a golf tee in each one, tapping gently. Remove the bit which hangs out and then put the door back into place. The screw can bite into the tee.

TIP! A golf tee is a wonderful fix for wiggling hinges. Take the door from the hinges and tap your golf tee into every screw hole.

Ensure the blade is in proper condition prior to sawing. Dull blades make work harder, plus they are a safety hazard, especially on power saws. Dull blades can also cause costly errors due to damage to your wood.

Use the right-sized nail for the project. A large nail can split wood, leaving it loose. Nails that are too small won’t hold the pieces together. The right size is a must.

Wear sturdy footwear anytime you are working with wood. Where you’re working there will be tools, nails, and wood pieces everywhere. It is important to always protect your feet. Injury can happen if you drop a heavy tool, kick something heavy, or step on a sharp object. The shoes must be tough enough to endure your work environment.

Make sure that your blade is in good condition before you begin sawing. A blade that has become dull can make it almost impossible to saw as you need to. A dull blade will also cause you to make mistakes and harm the wood that you’re working with.

TIP! Before you even begin sawing anything, check the blade to make sure it’s in good condition. Dull blades can make work difficult.

Having a beer while enjoying your hobby might seem like a good idea. But you should never do that while practicing woodworking. You should never drink while using woodworking equipment. This is also the same for prescription drugs.

Always keep your eyes open for furniture that someone is getting rid of. Often, you can find pieces of wood furniture that are free of charge or very cheap. Take a moment to consider possibilities before dismissing anything. Even if you find a dresser that is badly damaged, the drawers might be of some use.

Always pay attention to what you’re working on, since you never know what can fly into your eyes. You should always wear your safety glasses while working. Make no exceptions and then you’ll always be protected. If they do not fit that well or give clear eyesight, get a pair that do.

Woodworking kits are a great way to start out. They have all you need to complete a project. That lets you focus on getting a handle on woodworking. Practicing in this way is a good way to prevent waste resulting from newbie errors.

TIP! If you are new to woodworking, consider beginning with a woodworking kit. These kits come with pre-cut pieces of wood that you put together to make a certain project.

If you need excellent circular saw guides, then stair gauges is the answer. A stair gauge can help match the notches up. However, using both on the carpenter square’s tongue can make for a useful circular saw guide.

You have now expanded your knowledge on woodworking considerably. Put this information to use so that you can improve your skills and do better work. With continued learning and practice, you’re going to get better and better. You can’t go wrong when you use these tips. You will be amazed at the results.