Woodworking is an interesting hobby. People have been making things out of wood for years. It is not always easy, and there are so many things to learn along the way. Read these tips to get started with the rewarding art of woodworking.

Tain Conditioner

If you plan to use stain, test it on a small scrap of wood first. Then, you can stay away from any surprises if the stain looks differently after application. Wood tends to be unpredictable, so avoid disappointment and mistakes by doing a simple test.

TIP! If you are going to be staining your project, test on a scrap of wood or an inconspicuous area. This will allow you not to have any surprises later if the stain’s color looks different when it is applied.

Use pre-stain conditioner if you plan on staining your project. If you use a pre-stain conditioner, you will be less likely to notice any blotches or irregularities in your finished project. These conditioners will smooth out the uneven nature of the wood and allow your stain to penetrate evenly.

Stair gauges make good crosscut guides. Clamp them to carpenter’s squares and be sure they match the runs and rises of the stair jacks. Be sure to mark the location of the notches. Put them on your carpenter’s square guide for a great cut.

Never shake a finish or a stain. Only stir them. The ingredients in them can settle. Shaking can cause bubbling which prevents the products from mixing properly. Stir thoroughly until it is smooth and even.

Use stair gauges as a crosscut guide. Clamp these gauges to the carpenter’s square you have and be sure they’re matching up to the stair jack’s run and rise. Be sure to mark the location of the notches. An excellent crosscut guide for the circular saw is the result of the combination after you place them on your carpenter’s square, on the exact same tongue.

TIP! Use stair gauges as a crosscut guide. Clamp them to a carpenter’s square while making sure they line up with the rise and run of your stair jack.

If you rent a tool that you have not used before, make sure to get some tips on how to operate it. Quite often, they’ve got specialists available that can help you get comfortable with the tool faster than if you learned it on your own. Also ask for any documentation to help you out.

A good method in laminating a wood project is by using tip snips to trip the laminate. This tool is intended to cut metal, so it easily slices through laminates, which greatly reduces the energy needed. Try designating a pair of snips for laminate cutting so that they stay sharp.

Always check blade conditions before you saw. Dull blades can make it hard to do as much sawing as you want. It will also increase your chances for error, which could cost you money in the end.

The height of the work bench you use affects the quality of your finished product. Measure how far your waist is from the floor – this should be the height of your bench. Your bench will be at the perfect height at this measurement.

TIP! Your workbench’s height is more important than you realize. Measure the distance between the floor and your waist to learn the perfect height for your workbench.

You want to keep your ears protected when woodworking. Machines can be noisy and damage your hearing. Exposing your ears to these things for a long time can cause hearing loss. You can get throwaway ear plugs or you can buy expensive headphones. Whatever you choose, make sure to use them when operating machines.

Are you working with a screw in a space that is insufficient for your screwdriver and your hand to fit simultaneously or comfortably? The answer is waiting for you in your toolbox. Get a screwdriver with a long handle and a socket that is 12 point. Put the socket onto the end of your screwdriver, then attach this to your ratchet.

Enjoying woodworking with a couple beers may sound fun. This is not a good idea and can impair your judgement. Never work on a project when you are drinking alcohol. This is also true for prescription medications or illicit drugs.

Keeping a little ruler inside your pocket is smart, but it could fall out when bending over due to its length. Try switching to a metal ruler, keeping it in a pocket with your telescoping magnet, the kind used to reach and pick up screws or nails. The magnet will keep the ruler in your pocket at all times.

TIP! Keep a ruler inside your pocket, and make sure it stays put. Buy a metal ruler, and try keeping it in the same pocket as the smaller telescoping magnet you use to pick up loose metal screws.

Choose the right wood for the job. Don’t use woods that are soft like pine when making a table top; soft woods scratch easily. Each wood will have its own color when finished, too.

After reading the article, you should begin honing your woodworking skills. You can always be learning more about this craft. Do not be discouraged; it will take some time to hone your skills.