It is super easy and fun to start practicing woodworking. However, you may not know how to begin this exciting hobby. Do not concern yourself with this – take it slow. This post can be a big help for you to begin.

If you are going to be staining your woodworking project, use a pre-stain conditioner on the wood. A good pre-stain condition helps to even out any imperfections in your project that a stain can accentuate. The conditioner will let the stain apply evenly and smooth out the wood.

Anytime you are working around power tools, there is an element of danger; focus on safety at all times. Always purchase the necessary safety equipment to avoid injury. Don’t take guards off a tool – they’re intended to keep you safe. You don’t want to go to the hospital because you did something stupid.

TIP! As with anything involving power tools, safety is the number one concern in woodworking. Make sure that you always use tools properly and wear the proper safety equipment.

Before you apply a stain, test it on an area that is hidden or a piece of wood scrap. This lets you stay away from any sudden surprises when the stain color is not what you expected. Different woods can affect stains differently. Sometimes wildly different. Testing first is the best way to know what something will look like.

Never shake a finish or a stain. Only stir them. Certain ingredients in such items tend to settle with time. Shaking can cause bubbling which prevents the products from mixing properly. You need to stir it well. Keep stirring until all the settlement is evenly and smoothly dispersed.

Choose the correct wood for your project. Different types of wood can handle different levels of stresses. Some are stronger than others. Learn as much as you can about the different varieties of wood before beginning any woodworking project.

Before you commit stain to wood, it is usually a good idea to test out the stain in an unseen area of the wood first. This ensures that the stain will look as you expect it to once done. Wood and stains can surprise you, so test things out before you put it on the final project.

Gel Stains

When using stains, a great product choice is gel. Gel stains work better on lumber because the liquid kind usually run. Also, gel stains are thick, so they tend to stain more evenly.

Ask for a how-to demonstration when you rent a new tool. Oftentimes, they have someone available to train you with the tool. Also ask for a pamphlet if they have one.

When you apply wood finishes and stains, make sure you stir, not shake them. Ingredients may have settled onto the bottom as they sat on the shelf. Shaking can cause bubbles which can negatively impact your results. Be sure to stir thoroughly, until all settlement is dispersed evenly and smoothly.

TIP! Stir your finishes or stains rather than shaking them. Some of the ingredients in these stains and finishes tend to settle to the bottom over time.

Never use your fingers like a guide. The smart thing to do is to use another wood piece to push your wood up to the saw. This will ensure safety while you perform dangerous tasks.

You need a stair gauge inside your workshop. They can layout stair jacks as well as clamp carpenter’s squares. Doing so converts the carpenter’s square to a tool that can be used with a circular saw. This will help you with making straight cuts each and every time.

Know wood characteristics before buying or using it in your projects that need staining. Some woods are only paint grade, while stain grade woods are much better for staining. Also realize that veneer and particleboard are different. Particleboard will absorb too much stain, veneer might not absorb enough. Getting the right wood helps ensure your project turns out the way you expect.

Before you pull out the glue, make sure the pieces you want to glue fit together properly first. When you try to move things around after applying the glue, you’ll likely end up with a big mess. Dry fitting helps you figure out where each piece is placed.

TIP! Always do a dry fit prior to gluing two pieces of wood together. If you attempt to readjust the pieces once glued together, you risk damage to your project.

A small metal ruler is handy to carry around in your pocket for quick measuring. It has a tendency to fall out of your pockets, though. Get yourself a ruler made of metal and put it in the pocket where you store your telescoping magnet. This magnet helps you keep the objects together and in your pocket.

Golf Tee

If the hinges on your interior doors are loose, you can use a golf tee to fix them. Put the golf tee in the screw hole to prevent wiggling. Trim off the end of the tee still sticking out and hang the door again. The tee will allow the screw to bite into the door.

Add a stair gauge to the shop that you create. Commonly used to scribe stair jacks, it can also be used to attach to your carpenter’s square. This can make a carpenter’s square serve as a guide for a circular saw. If you use the square as a guide, your cuts will be straight every time.

TIP! Your woodworking shop needs a stair gauge. This is used for laying out stair jacks and can also be used to clamp a carpenter’s square.

You may not be a master woodworker as of yet, but you are getting there. Keep learning more about woodworking to really appreciate it. Your end results will astound you!