If you don’t want to get into woodworking because you’re thinking it’s hard to do, then you should read this article. Anyone can do it. All you need is an interest and some curiosity. The following article will give you some of the information you’re going to need to begin working with wood today.

You can make your own reusable sanding blocks. For each sandpaper grit that you usually use, cut six blocks from a scrap of three-quarter inch plywood. Make sure they are about 2.5″ x 4.75.” Spray some adhesive on your blocks and on the cork tile. Stick a single block onto the cork and make sure you’re cutting the cork in a flush way using your utility knife. Spray some adhesive on a sandpaper sheet and stick it on each cork block face down. Then cut the sandpaper that is flush with the cork and label the blocks.

If you’re using stain, test it first on a scrap of wood. Then, you can stay away from any surprises if the stain looks differently after application. You never know how wood will behave, so do the test first.

TIP! Before staining your project, test the stain in a hard to see area, or, better yet, on a piece of scrap wood of the same type. This lets you stay away from any sudden surprises when the stain color is not what you expected.

Never stain an entire piece of wood without testing a little part of it first. Testing first will give you an idea of how the stain will look on a real piece. You’ll get no unwelcome surprises later. This will go a long way in preventing disappointment.

Pick out the right kind of wood. In woodworking, not every wood can sustain every type of stress. If you are unsure of how each type of wood will react to what you are trying to accomplish, you should spend some time learning about them first.

When you are making a budget, remember to itemize every new tool that you plan to get. You may only think about the wood and overlook the tools themselves. If your project does indeed require extra tools you don’t have on hand, it can break your budget if you don’t plan for them.

For crosscut guides use a stair gauge. Make sure that they are clamped next to the carpenter’s square when you cut. After that the notches can be marked. Putting them on the carpenter’s square tongue makes for a great guide for a circular saw.

TIP! Try using stair gauges for your crosscut guides. Clamp these gauges to the carpenter’s square you have and be sure they’re matching up to the stair jack’s run and rise.

If you are renting a tool that’s new to you, ask the company you are renting from for a quick tutorial. Many times, they have specialists that will show you how to use the tool properly and safely. Find out if they have any helpful handouts or worksheets you can use.

Whenever you plan to cut a narrow piece of wood, don’t use your fingers as a guide! Using a piece of wood as a guide is much safer. This will help ensure you keep all of your fingers, making woodworking much easier.

You now have a lot more information about woodworking. Use the information here to help improve your skills so you can finish great projects. With a lot of practice, you’ll master this craft. If you use these tips, you’ll be destined for success. You will be amazed at the results.

Were you aware that your workbench height makes a difference in your quality of work? Measure from the floor to your waist. This will give you the optimum height for a perfect workbench.