It can be quite exhilarating when you get into the woodworking art. Yet, there is so much to learn about it, you may be confused when you are starting out. Take the worry out of it by proceeding just one step after the other. This article will show you exactly how to do that.

Test your stains on scraps of wood or inconspicuous areas of the piece you’re using. This can prevent surprises if the shade of the stain is different after it has been applied. Wood can be unpredictable, so you can avoid mistakes and disappointment by doing this simple test.

You can make your own reusable sanding blocks. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use. Your blocks should be 2.5 x 4.75. Put spray adhesive on the blocks and the tile square. Stick a block to the cork, making sure to cut the cork flush with a utility knife. This piece should then fit you hand fairly well and be secure enough to not slip. Finally you can cut the sandpaper so it’s flush with the cork and then you can label each block.

Are you aware that your workbench height is essential for having successful woodworking projects? It should hit at your midline. This is the perfect workbench height.

Never shake a finish or a stain. Only stir them. Some of the ingredients tend to settle as time goes on. Shaking can cause bubbling and prevent it from mixing well. Stir until the solution is even so that you get the best results.

Select the appropriate kind of wood for your projects. In woodworking, not every wood can sustain every type of stress. If you are unaware of whether a particular type of wood is suited to the project you want to build, invest some time researching it first.

Use stair gauges for crosscut guides. Clamp your carpenter’s square to your stair gauges while ensuring they coincide with the rise and run of your stair jack. Then you can mark notches. Put them on your carpenter’s square guide for a great cut.

TIP! Try using a stair gauge as a crosscut guide. Match them to the rise and run of your stair jack, then attach them to the carpenter’s square.

Never use your own fingers as guidance when cutting narrow chunks of wood. Instead, use a piece of scrap wood to safely push the lumber through your table saw. This helps you keep every finger, which are required for doing future woodworking.

A dry fitting is important to do before adding glue to your wood. If you adjust things after applying glue, you might cause some damage. A dry fit is going to help you figure out what goes where.

Add some springiness to your grip. There are some times when you have to try using a spring clamp, but you may just be only able to use a single hand. Opening these with only one hand can be difficult. There is a way to make it easier. Before you start the glue process, with your free hands place the clamps on a piece of random scrap wood. This makes opening them with one hand unnecessary.

Prepare your finishes and stains by stirring them instead of shaking them. Stir often because these stains settle over time. Shaking can cause bubbling which prevents the products from mixing properly. Stir as best as you can to prevent this from happening.

TIP! When using stains or finishes, be sure to stir them, rather than shake them. There are ingredients in these types of products that can settle over a period of time.

Do you want to tighten a screw but don’t have space to fit the screwdriver and your hand? Your toolbox has answers. Grab your 12-point socket and a long-handled screwdriver. Get the socket fitted to your screwdriver and then attach that to the ratchet you like to use the most.

Avoid becoming too perfect with only using tape measures. Practicing on story sticks is effective and gives you confidence to work your way to that final cut on your project piece. Just cut scrap wood so you can dry fit the piece. This also helps stretch your imagination and develop good woodworking techniques.

Beer is enjoyable on a hot weekend. However, saws and beer together is never a combination that shows good results. Stay away from woodworking projects while consuming alcohol. Likewise, do not work on projects while taking medication or illegal drugs.

Before you begin, have a budget in place so you will know the limits of your project. You don’t want to start on a project and then realize you don’t have the money to finish. You’re excited to make an item, only to find half way through that the money just isn’t there to complete it the way you want. Avoid surprises by doing your homework before beginning.

TIP! It is important that you have a realistic idea of your budget and what you can make with it. A lot of times, your eyes can be way bigger than your budget when you do woodworking projects.

Take the necessary safety precautions when you have the table saw out. When crosscutting, you need to set the cut’s length with a block that has been clamped on the fence. Just using the fence can cause the board to spring back; however, clamping the board will prevent this. This can save you from a serious injury during your project.

Make sure the lighting is good in your shop. If you do not have good lighting, you may not get the results you want. This will allow you to figure out if you are sanding properly. Lighting can also give you a better view of the stain that you use.

Test the wood stain on a spot that is inconspicuous. Check to see that the color is what you want. Also, look to see that the stain absorbs like you expect. If you test the stain in an inconspicuous area first, you can make your adjustments. That saves you work overall.

Make sure you choose the right wood for each project that you work on. In woodworking, not every wood can sustain every type of stress. Practice with wood so you know how it reacts to what you do to it.

TIP! Select an appropriate sort of wood for each project. Some wood is stronger than others, while other woods need to be soft for what it is you’re doing.

Use only one extension cord when woodworking. You can only use one tool at a time, so just unplug the one you no longer need. Then you can plug in the one you need. This safety tip will keep you from tripping over tangled cords and reduce the risk of electrocution.

Plan out your wood pieces by writing a list before you start. It is best to be organized before tackling something, and writing it all down first will keep things clear and concise. Knowing the quantity of wood you need can make the whole process work more efficiently. The better you plan, the better your outcome.

Think about future modifications when planning a big project. For instance, are you going to eventually want electricity in that shed you’re building? If that’s the case, make sure you have room for switches and wires to be installed, along with space for light on the ceiling.

When you work with wood, wear the right shoes or boots. There will be nails, pieces of wood and tools around. A good quality boot will keep your feet safe from stepping on nails or dropping a heavy piece on your foot. Your shoes should be sturdy enough to withstand your walking around the work environment.

TIP! Proper footwear is important when you are working with tools and doing projects. There could be nails on the floor, pieces of wood and other debris that could hurt you.

When you are working around power woodworking equipment, never wear clothes that fit too loosely. Many accidents have happened due to it. Keep your shirt tails tucked in and make sure you don’t have dangling jewelry. Protect your feet with steel toed boots as well.

With all that you’ve read here, you are closer than ever to being a good woodworker! There are many different types of skills that you can learn. You will enjoy everything that you create.