If you would like to learn new woodworking skills you have come to the right place. There are many tips available that can improve your craft. Read this article if you want to better your woodworking skills.

Gel stains are great for staining furniture pieces. Gel stains will adhere much better to your wood. Gel will also have a more consistent pigment upon application.

Create your own sanding blocks. Use a scrap of 3/4″ plywood to cut six blocks, one for each sandpaper grit you need. Be certain they measure 2.5 inches across by 4.75 inches long. Use spray adhesive on both the cork tile square and your blocks. If the cork is too large, trim it with a utility knife. Use spray glue on sandpaper and stick it to the block. Then cut the sandpaper that is flush with the cork and label the blocks.

TIP! Make your own sanding blocks. Use a scrap of 3/4″ plywood to cut six blocks, one for each sandpaper grit you need.

You need a stair gauge inside your workshop. This is used for laying out stair jacks and can also be used to clamp a carpenter’s square. You can then use your square as a guide for a circular saw. You won’t have to worry about uneven cuts any more!

You should have a good understanding of the different types of wood available to you and their many characteristics. Each type of wood is completely different. They all respond to staining in their own ways. Different cuts will have different effects on splintering. You will also see a large variety of wood grains. These are all variables to consider when working with wood.

Do you want to tighten a screw but don’t have space to fit the screwdriver and your hand? Your toolbox has answers. Grab a screwdriver with a long handle and a 12-point socket. Put the socket onto the end of your screwdriver, then attach this to your ratchet.

Test your stains on scraps of wood or inconspicuous areas of the piece you’re using. This will prevent you from getting an unwanted stain color on your final product. Since wood is often unpredictable, you can avoid unpleasant surprises by completing this test.

TIP! Test an area or scrap wood before using a stain. This can help you avoid surprises in case your stain color is different after you’ve applied it.

Proper footwear is important when you are working with tools and doing projects. Your feet need to be protected from stepping on nails or having tools dropped on them. It is important to always protect your feet. Injury can happen if you drop a heavy tool, kick something heavy, or step on a sharp object. You need to have shoes that are study enough to protect you when working in your woodworking shop.

Avoid becoming obsessed with tape measures. Many times, making cuts out of scrap wood is preferable. Cutting a scrap piece of wood is a great idea, allowing you to try out your fitting. When you plan your cuts properly, you’ll do a better job.

Enjoying woodworking with a couple beers may sound fun. Just remember, drinking while you work with a saw can have disastrous consequences. Don’t ever drink while working on projects. Also, you never want to use illegal drugs or prescription medication when woodworking.

You can make your crosscut guides using stair gauges. Clamp them to carpenter’s squares and be sure they match the runs and rises of the stair jacks. After that the notches can be marked. By placing them on the tongue of the carpenters square that is the same, you can come up with a very good guide for the circular saw.

Bird Feeder

Enjoy your yard more thanks to your woodworking abilities. Build yourself a bird feeder or a nice deck. The bird feeder will help attract birds that will keep away pesky bugs. If woodworking is something you want to do professionally, have client meetings on a deck you built so they personally see your work.

There are a couple of hand tools you need to buy before you get started with a woodworking project. The first tool to get is a hammer. The best type of hammer for woodworking is a claw hammer. Get one that feels good when you hold it. It should not be excessively heavy.

Never shake a finish or a stain. Only stir them. These can settle can must be stirred. Shaking can cause bubbling which prevents the products from mixing properly. Be sure to continue stirring until everything that has settled is blended in evenly.

TIP! When you apply wood finishes and stains, make sure you stir, not shake them. Ingredients may have settled onto the bottom as they sat on the shelf.

Create a reusable sanding block. This makes it easy for you to control the sanding and also isn’t as hard on your hands. Scrap plywood can be turned into a fine holder. Cut a piece of wood and apply sandpaper using a spray adhesive.

Using a drafting square can help your accuracy when performing smaller cuts. If you must make a cut in the 2-3 foot range, measuring accurately can be tricky. Carpenter squares are hard and drywall squares aren’t always accurate. The best tool to use, however, is a drafting square, which you can find at an art store. They are simple in use, and they can mean a lot to your accuracy.

Have some patience. A lot of people begin woodworking project, but get frustrated when they do not see instant results. Keep in mind that your finished project is somewhere inside that piece of wood. Be patient and stay focused on your work. Soon enough that project you’re working on will be finished!

When you are making a budget for woodworking, consider the tools. It’s easy to just overlook things because you’re thinking of the cost of lumber and that’s all. But, if you need other things that you don’t own and didn’t think about, you can really mess up your budget and may not be able to finish your project.

TIP! When you are making a budget for woodworking, consider the tools. It’s simple to overlook this as you are thinking about the wood costs associated with a project.

Plan your wood pieces on paper before you get started. Your will have greater control of your project when you take the time to figure out what you need and how much it will cost by writing it down first. You’ll be more efficient if you know just how much you will need of all of your materials. Things will be easier if you plan ahead.

There are a number of fine woodworking programs on television these days. You can learn quite a bit from them and gain ideas that you would not have otherwise had. Check out your TV guide to learn when these shows are on.

Scrap Wood

Don’t guide your saw with your fingers when cutting narrow pieces of wood. Rather, make use of a longer, thinner piece of wood that can push it along the saw’s surface. It will help you to maintain the use of all ten fingers on your hands.

TIP! Never use your fingers when guiding the cut of a slim piece of wood. Instead, a long and thin piece of scrap wood should be used to push your piece through your saw.

Don’t throw out scrap wood, it may prove useful in the future. Scrap wood can be used to fill gaps or for clamping. You can even use them as practice when you buy a new tool.

Don’t wear clothes that are loose when you are working with tools. Many accidents have been caused by loose fitting clothes. Protect yourself by wearing a fitted shirt. Wear boots with a steel toe to keep your feet protected.

As you may already know, a fly cutter is a very hazardous tool to work with. In order to make the bit and arm easier to see, so you can avoid them, paint the tips with fluorescent paint. This will allow you to get a better and safer distance between you and danger as you proceed with cutting wood.

One of the essential tools for any woodworking shop is a stair gauge. Commonly used to scribe stair jacks, it can also be used to attach to your carpenter’s square. This will make them into guides for a circular saw. Every cut will be straight from now on.

TIP! A handy tool for every woodworking shop is a stair gauge. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square.

If you notice you double check your measurements each time you use a circular saw up against the straight edge, then write down your measurements from shoe edge to blade on the shoe itself. Do so for both sides of the blade. if it is hard to read, put a blank address label on the shoe and then write on it.

The tips you just read are great for any woodworker. You have some useful information that you can use for your next woodworking project. Now you just have to get started!