If woodworking has long interested you, you might have wondered where to begin. You will learn a lot through practice and dedication. Keep reading to learn more about the craft of working with wood.

Use a pre-stain wood conditioner before applying a stain. If you use pre-stain conditioners on your project, you’re going to be not as likely to have irregularities on the project when you’re done. This is because the conditioners allow stains to penetrate evenly.

Anytime that you begin a new project you must consider your safety first. Always use your tools properly while wearing adequate safety equipment. Guards on power tools are provided for your protection so leave them alone. Nasty injuries are no way to end a woodworking project.

TIP! When you are working with wood, safety must be the number one priority. Be certain to use all tools correctly and observe all safeguards.

Make your own reusable sanding blocks. For each sandpaper grit that you usually use, cut six blocks from a scrap of three-quarter inch plywood. Your blocks should be 2.5 x 4.75. Use an adhesive spray on the blocks as well as your cork tile square. If the cork is too large, trim it with a utility knife. Get a sandpaper sheet, spray it with adhesive, and then apply it to each of your cork blocks; they need to be face down. Trim your sandpaper so that it is even with the corks and label each block appropriately.

Test an area or scrap wood before using a stain. This will help you avoid any surprises if the stain color looks different after it has been applied. Because wood tends to be fickle, mistakes can be avoided by testing it out beforehand.

You can use stair gauges to make crosscut guides. To use, clamp the gauges to a carpenter square. Mark your notches. If you do it properly, you will have an excellent crosscut guide.

Before you apply a stain, test it on an area that is hidden or a piece of wood scrap. This can help you avoid surprises in case your stain color is different after you’ve applied it. It is important to avoid mistakes to save time and money.

TIP! Never stain an entire piece of wood without testing a little part of it first. This ensures that the stain will look as you expect it to once done.

Learn more about different kinds of wood and their characteristics. Each type of wood has different traits. Different types of wood take stain differently. The cuts could differ in splintering and effects. Learning how different types of woods and different types of grain is important to your woodworking. These will all factor in to how your project progresses.

Screw Holes

If the hinges to your interior door are loose, use a golf tee to fix the problem. Take off the door, then remove the hinges. Then gently hammer the golf tee into the screw holes. Cut the part of the tees that do not fit into the screw holes before putting the door back in its frame. The tee will provide the screw with something that it can bite into.

When you’re using finishes or stains you should always stir them instead of shaking them. Stir often because these stains settle over time. However, if you shake it, it may create bubbles and not allow the product to mix well. Stir as best as you can to prevent this from happening.

TIP! When using stains or finishes, be sure to stir them, rather than shake them. Stir often because these stains settle over time.

It’s very important to always make sure that the saw blade you use is in great condition every time you use it. A dull blade will not be able to saw the way you need. It could also lead to costly errors, depending on what type of wood you are using.

The art of woodworking is an interesting one. It is hoped that reading this article has made you ready to go to the woodworking shop. No matter if you want to build furniture, toys or decorative items, now is the time to begin. You won’t know what you can do until you try!