It can be quite exciting to get started with woodworking. Woodworking is a craft that has been around for thousands of years and enjoyed by millions of people. Woodworking can be very challenging, and there is always something new to learn. Practice makes perfect, and you will soon be creating beautiful woodworking projects.

A stair gauge is a great tool to keep in your shop. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square. It can transform your square into a circular saw guide. The square will get you wonderfully straight cuts all the time.

Before you stain your wood project, apply a pre-stain conditioner onto the wood. The conditioner will make it more difficult to notice irregularities in the wood. Such conditioning agents smooth the wood surface and let stains sink in evenly.

TIP! Use a pre-stain wood conditioner before applying a stain. The conditioner will make it more difficult to notice irregularities in the wood.

Know all about the wood you are getting prior to purchasing it, especially if you plan to stain it. For example, a wood that has a stain grade is good for staining. A wood that has a paint grade is lower quality. Differentiate between veneer and particle board as veneer tends to resist stain, while particleboard can take on too much stain. Buying the right wood will help make sure your project is a success.

Golf Tee

You can simply fix some hinges with a golf tee if you are working on an interior door. Take the door off and remove the hinges, then lightly tap the golf tee into the screw holes. Trim off the end of the tee still sticking out and hang the door again. The tee will provide the screw with something that it can bite into.

When working with stains, dab a small amount in a test area to see how it comes out. This will help you avoid any surprises if the stain color looks different after it has been applied. Wood is not always predictable, so you can stay away from disappointment and mistakes with this easy test.

TIP! Test an area or scrap wood before using a stain. This makes sure that you won’t run into any surprises.

Before beginning to cut any wood, ensure your blade is sharp and in good working order. A dull blade will make you work too hard. This can cause costly mistakes in your project. Checking your saw blades before hand is a lot easier than losing money and time.

Make certain to have the right nails for your specific project. A nail that is too large in diameter will often split the wood, causing it not to hold properly. In addition, if you pick up something that is too little, it won’t be big enough to do the job correctly. You should know what size you need to get the job done.

These tips need to be used to benefit you. There is always something new to learn, so remain open to learning more. Do not get discouraged as woodworking requires dedication and patience.

If you rent a tool that you have not used before, make sure to get some tips on how to operate it. They usually have specialists that could help you adjust to your new equipment a lot faster than you would if you had to do it alone. Also ask for a pamphlet if they have one.