Woodworking skills can always come in handy throughout your life. From building a shelf to installing a deck, doing it on your own will bring you great pride. Read on to learn much of what you need to know when it comes to woodworking.

Try using stair gauges for your crosscut guides. Make sure that they are clamped next to the carpenter’s square when you cut. Then mark the notches. By placing them on the tongue of the carpenters square that is the same, you can come up with a very good guide for the circular saw.

Anytime that you are planning to stain wood, you should be sure to use a high-quality wood conditioner beforehand. This will help you to get an even finish when you stain. They will make the wood smooth and allow the stain to go on evenly.

TIP! One good product to use if you are staining your project is a conditioner, to be used before staining. A pre-stain conditioner helps keep away any irregularities or blotches in the wood.

Do you know how much your workbench height affects your work? To find the best height, measure the distance from the floor to your waistline. That height is optimal for your workbench.

Stir your finishes or stains rather than shaking them. Ingredients can settle to the bottom. Shaking can cause bubbling which prevents the products from mixing properly. Make sure that the product is thoroughly stirred, and everything is evenly dispersed.

If you need to buy or rent tools, include that cost in your budget. This is something often overlooked. Still, tools can get expensive, so you have to think about them.

Create sanding blocks you can reuse. Cut 6 blocks from scrap wood in the size of the sandpaper you use. Be sure that the measurements are around two-and-a-half inches by four-and-three-quarters inches. Spray adhesive on the wood and a piece of cork. Start by sticking a block to the cork before cutting the cork with a utility knife. Use spray glue on sandpaper and stick it to the block. Cut the sandpaper so it aligns with the cork and do not forget to label your blocks.

Gel Stains

Gel stains are fantastic when you stain furniture. Gel stains work better on the wood because they don’t run like the liquid stains do. Not only that, but gel stains tend to be thicker than liquid, so that the pigment is consistent, which makes for a more even stain on vertical and horizontal pieces.

Don’t use your fingers to guide your cutting. Use a thin and long strip of wood instead. This will help ensure you keep all of your fingers, making woodworking much easier.

Be realistic about your budget. Keep in mind that complicated projects are often the most expensive ones. You’re excited to get started only to find out that halfway through you’re not able to afford continuing. Do your homework before you start to avoid surprises.

TIP! Make sure you have a good idea of what your budget can really make. When it comes to woodworking, it is easy to get lost in the project without a grasp on reality.

Now you know a little more about woodworking. Everybody will end up doing a woodworking project sometime in their life, so this article will be a great tool to look back on. Consider what you have learned and think about just what you can do with it.